Steering Column: Application and ID

Steering column, identification





From February 2000 a new steering column manufactured by Krupp Presta is installed in lefthand drive vehicles. Steering column from Nacam is not installed any more.
The reach height and adjustment functions are the same for both steering columns.
Both are supplied as replacement carts.
When replacing a steering column, always use one from the same manufacturer as the original.
Before removing the steering column, be sure to identify which one was originally installed in the vehicle.

Identifying the steering column
A - Steering column
Manufacturer: Nacam





1. Transportation - device
^ Remove first after steering column is installed
2. Steering column
^ Column is not visible in area -2
3. Steering column universal joint shaft
4. Hex bolt
^ 25 Nm
^ Installed without locking fluid

B -Steering column
Manufacturer: Krupp Presta
1. Transportation - device
^ Remove first after steering column is installed
2. Steering column
^ Column is visible In area2
3. Steering column universal joint shaft
4. Hex bolt
^ 25 Nm
^ Installed with locking fluid D 000 600