Micro-Switch, Removing and Installing (Sedan)

Micro-switch, Removing And Installing

Removing







- Removing and installing lock cylinder housing - 2 -.
- Release catches at micro-switch - 1 -.

To do so, press catches downward - arrow -.







- Disengage catches - arrows - of micro-switch - 1 - from lock cylinder housing - 2 -.
- Remove micro-switch - 1 - from lock cylinder - 2 -.

Installing







- Secure wires - 1 - and - 2 - in retaining profile - arrow - of micro-switch - 3 -.







- Lock catches - arrows - of micro-switch - 1 - into lock cylinder housing - 2 -.







- Make sure that micro-switch is positioned with securing tabs - arrows - on lock cylinder housing - 1 -.
- Before locking micro-switch, if must be checked that wires are lying correctly in retaining profile of micro-switch and lock cylinder. If this is not case and micro-switch is locked, wires/micro-switch may be damaged.







- Lock micro-switch - 1 - with lock cylinder housing - 2 -. Make sure that catch - arrow - is locks correctly.
- Install lock cylinder housing.