Cruise Control System, Activating

Cruise Control System - 1.9L TDI, Activating

If a Diesel Direct Injection Engine Control Module (ECM) has been replaced, it may be necessary to activate the cruise control function in the new ECM. Check system status and activate/deactivate system using the following procedure:
- Connect VAG 1551/1552 Scan Tool.
- Switch on ignition.
- Press buttons 0 and 1 to select Address word 01: "Engine electronics".

Display (example only)


038906018M 1,91 R4 EDC G00SG 0602 ->
Coding 00001 WSC XXXX


- If top line of display shows "G00SG", cruise control is activated.
- If top line of display shows "00SG", cruise control is not activated.

- To begin activation sequence press -> button.

Display will appear as shown


Rapid data transfer HELP
Select function XX


- Press buttons 1 and 1 to select function 11 "Login procedure"

Display will appear as shown


Rapid data transfer Q
11 - Login procedure


- Press Q button to enter input.

Display will appear as shown


Login procedure
Input Code Number XXXXX


- To activate cruise control, enter code number 11463
- To deactivate cruise control, enter code number 16167
- Press Q button to enter input.
- End output (function 06) and perform test drive to confirm cruise control functions.