Vehicle Damage Warnings

'

Rules of cleanliness
When working on the fuel supply/injection system, pay careful attention to the following rules:
- Thoroughly clean all fuel line connections and adjacent areas before disconnecting.
- Place parts that have been removed on a clean surface and cover. Do not use fluffy rags. Use surfaces of paper or plastic.
- Carefully cover opened components or seal them if the repair cannot be done immediately.
- Only install clean components. Only unpack replacement parts immediately prior to installation. Do not use parts that have been stored loose (e.g. in tool boxes, etc.).
- When the system is open do not work with compressed air if it can be avoided. Do not move vehicle unless absolutely necessary.
- Ensure that no Diesel fuel spills on coolant hoses. Immediately clean any spilled fuel. Hoses affected by spilled fuel must be replaced.