Adapting Functions and Components

Adapting components and functions
Special tools and equipment





- VAS 5051 Vehicle Diagnosis, Testing and Information System
- Diagnostic cable VAS 5051/1 or VAS 5051/3
- Connect Vehicle Diagnosis, Testing and Information System VAS 5051 as follows:





- Plug connector of diagnosis cable VAS 5051/1 or VAS 5051/3 to Data Link Connector (DLC) (arrow).





- Switch tester on (arrow).
The tester is operationally ready when a picture (photograph) of a vehicle appears on the display.
- Switch ignition on.
- Touch key on screen for: Guided Fault finding.
- Select one after another:
^ Brand
^ Model
^ Model year
^ Variant
^ Engine code
- Confirm data as entered:

Note: Wait until the tester has read all the available control modules (vehicle system test).

After all control modules have been interrogated:
- Press "Go to" button.
- Select "Function/component selection".
- Press "Drive (Repair group. 01; 10. . .26; 28...39)".
- Choose corresponding engine code.
- Select "01-Systems capable of self-diagnosis"
- Select "engine management system".
- Under "Function" or"Electrical components", select function or component to be adapted.