Intake Manifold Lower Section

Intake Manifold Lower Section, Disassembling and Assembling






1 - Cable guide
- Clipped onto fuel rail
2 - 10 Nm (7 ft lb)
3 - Fuel rail
4 - Supply connection
5 - Return flow connection
6 - Intake manifold lower section
7 - Seal
- Always replace
8 - To intake hose
- For air circulation of fuel injectors
9 - Bracket
- For Secondary Air Injection (AIR) pump motor -V101- and secondary air inlet valve:
- Secondary air system:
10 - 25 Nm (18 ft lb)
11 - O-ring
- Always replace if damaged
- Before installing, moisten with clean engine oil
12 - Injectors -N30- through -N33-, -N83- and -N84-*
- Air shrouded
- Checking. Testing and Inspection
13 - Retaining clip
- Check securely seated
14 - Vacuum connection
- To T-piece connection non-return value/intake manifold upper section
15 - Fuel pressure regulator
- Checking. Testing and Inspection