Tail Lamp: Locations

Rear Lights (Jetta), Assembly

CAUTION!

Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, recode and check operation of anti-theft radio. Also check operation of clock and power windows.






1 - Housing
2 - Gasket
- Replace if damaged
3 - Hex nuts M5
Qty. 3
4 - Rear fog light bulb*
12V / 21W
Left side only
5 - Brake light bulb
12V / 21W
6 - Turn signal bulb
12V / 21W
7 - Bulb holder
8 - Tail light bulb
12V/5W
9 - Backup light bulb
12V/21W

*) Where applicable