Lock Carrier Trim, Removing and Installing

1 - Lock carrier trim
2 - Screw
- Qty. 2
3 - Nut
- Qty. 4
4 - Rear compartment seal
5 - clip
6 - Retainer
- Riveted to trim

Removing
- Remove screws -2-.
- Remove nuts -3-.
- Pull lock carrier trim -1- upwards off lock carrier panel.

Installing
Install in reverse order of removal.

NOTE:
- Check clips -5- before assembling and replace as necessary
- After installing the trim, check the rear compartment seal -4- for proper fit