Installation Unit, Removing and Installing

Installation Unit, Removing And Installing

Removing
- Removing automatic rotary switch for sunroof.
- Remove molded headliner.







- Disconnect water drain hoses from installation unit - 1 - - arrows -.







- Remove bolts - 2 - and - 4 - (with sleeves) and remove installation unit from the vehicle with a second mechanic.

Installing







- Insert installation unit - 1 -, align according to bolt bores and insert bolts - 2 - and - 4 - (with sleeves).







- Check and establish if necessary correct routing of wires and harness connectors for electrical consumers at roof.
- Secure (8 Nm) installation unit - 1 - of drive motor for sunroof - 3 - beginning at left and right toward rear.
- Install water drain hoses - arrows -.
- Connect harness connector for drive motor - 3 -.