Checking Wheel Speed Sensor Allocation

Checking wheel speed sensor allocation

Display group 001

- Press buttons -0-, -0- and -1- to input display group number 1 (001).
- Press -Q- button to confirm input.





- There are always 4 display fields (arrows) in the display group. Descriptions of the individual values in display fields 1 - 4 can be found in the table.





Indicated on display (vehicle stationary)
- Press -C- button for next display group number entry.

If the -> button is pressed, buttons -0- and -8- ("Read Measuring Value Block") must be pressed again to regain entry.





For display group 00 1 remember.,
The momentary wheel speeds are displayed, and are used to verify correct wheel speed sensor connections. (The vehicle must be raised and the wheel must be rotated by hand by a second technician).