Checking DTC Memory, Function 02

NOTE:
The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.

- Switch printer on by pressing PRINT button (indicator lamp in button lights up).

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0-and -2-to select "Check DTC Memory" function 02.

Indicated on display

Rapid data transfer Q
02 - Check DTC Memory

- Press -Q- button to confirm input.

The number of stored DTCs appears on the display.

X DTC recognized ->

Stored DTCs are displayed and printed out one after another.

- Check print-out against DTC table and repair all malfunction as necessary. Radio System

If "No DTC recognized" is displayed the program will return to the initial position after pressing -> button.

No DTC recognized ->

Indicated on display

Rapid data transfer HELP
Select function XX

If something else is displayed:
See scan Tool operating instructions
- End output (function 06). Ending Output, Function 06
- Switch ignition off and disconnect VAG1551 scan tool.