Mirror Glass, Removing and Installing

Mirror Glass, Removing And Installing

NOTE: Wear protective goggles and protective gloves when working.

- Switch off ignition and all electrical consumers and remove ignition key.

Removing







- Protect housing edges against paint damage e.g. using fabric-reinforced adhesive tape - 2 -.
- Press mirror glass - 1 - into mirror housing at top - arrow -.
- Press mirror glass - 1 - off bracket in housing using Pry Lever - Rmv Outside Mirror 80-200 and disconnect harness connectors for mirror heater from rear side of mirror glass.

Installing
- Connect connector terminals for mirror heater to mirror glass.
- Press mirror glass at center on bracket in housing.