Carrier Unit, Removing and Installing

Carrier Unit, Removing And Installing







Removing

- Remove moulded headlining
- Pull water drain hoses -arrows- off carrier unit -1-.
- Remove bolts -2- and -4- (with sleeves) and lift carrier unit out of vehicle with help of second mechanic.

Installing

- Insert carrier unit -1-, align with bolt holes and insert bolts -2- and -4- (with sleeves).
- Check electrical consumers electrical wiring and connections on roof and reinstate if necessary.
- Tighten carrier unit -1-, starting at sunroof drive -3- on left and right-hand sides moving rearward (8 Nm).
- Fit water drain hoses -arrows-.
- Fit connection for drive -3-