Brake Lamp: Service and Repair

Rear lights, removing and installing

Removing







1 - Knurled nut
2 - Washer
3 - Spacer
4 - Retaining bolt
5 - Rear light

- Remove rear striker mount cover.
- Reach behind respective quarter panel trim and unscrew knurled nut -1-. Make sure washer -2- and spacer -3- do not fall down.
- Remove rear light -5- and disconnect electrical connector.

Installing
- Connect electrical connector.
- Insert rear light housing into body opening.
- Insert retaining bolt -4- into body opening.







- Insert rear light into cutout (arrow).







- Slide spacer -3- and washer -2- onto retaining bolt -4-, attach knurled nut - 1- and tighten by hand.