Turn Signals: Service and Repair

Side Mounted Turn Signals, Removing and Installing


NOTE:
- Side mounted turn signals can only be removed from the vehicle interior.
- Light emitting diodes (LED) with a long service life are installed in the side mounted turn signals, instead of normal bulbs.
- The complete turn signal must be replaced if damaged.


Removing







- Remove inner plenum panel cover:
- Remove dust and pollen filter (right-hand side only)
- Pull rubber grommet -3- off.
- Release connector -2- and pull off.
- Remove securing screws -1- (screws are secured against falling out).
- Pull side mounted turn signal out outwards.

Installing
Install in reverse order.