Evaporative (EVAP) Emissions System Components

Evaporative (EVAP) emissions system components

Note:
^ Components marked with an * are checked by the On Board Diagnostic (OBD).
Refer to Powertrain Management
^ Components marked with ** are checked by the Output Diagnostic Test Mode (DTM).

1. Leak Detection Pump (LDP) -V144
2. 3-pin harness connector
^ Black
3. Vacuum line
4. Vent line
5. Vent line
6. Evaporative Emissions (EVAP) canister
^ In right rear wheel housing under wheel housing liner
^ Mounted on body
7. 10 Nm (7 ft. lbs.)
8. 3 Nm(2 ft. lbs.)
9. Air filter
^ For Leak Detection Pump
10. Suction hose
^ Check for tight fit
11. Pressure hose
^ Check for tight fit