Wheel Speed Sensor on Rear Axle (Disc Brakes)

Wheel Speed Sensor On Rear Axle (Disc Brakes), Removing And Installing
Removing
- Raise vehicle.





- Separate wheel speed sensor and speed sensor wiring connector -1-.
- Remove bolt -2- from stub axle.
- Pull ABS wheel speed sensor out of stub axle.

Installing
- Before inserting wheel speed sensor, clean hole inner surface and coat speed sensor with grease, Part No. G 000 650.
- Insert wheel speed sensor into hole in Stub axle and tighten bolt to 8 Nm (71 inch lbs.).
- Connect wheel speed sensor to speed sensor wiring.

Wheel Speed Sensor Rotor On Rear Axle (Disc And Drum Brakes), Checking
- Raise vehicle.
- Remove wheel.
- Vehicles with drum brakes, remove brake drum.
- Remove wheel speed sensor from wheel bearing housing.
- Check rotor for damage or dirt.
- If rotor is damaged, remove wheel hub with rotor and replace. refer to Transmission and Drivetrain.