Brake Light Switch: Adjustments

Brake Light Switch, Adjusting

Note:
Remove brake light switch to adjust.
- Remove driver's side storage compartment.
- Pull harness connector off brake light switch.
- Remove brake light switch by turning 90° clockwise.
- Pull brake light switch plunger fully out.
- Press brake pedal down as far as possible by hand.
- Guide brake light switch through assembly opening and reinstall by turning 90° to left.
- Release brake pedal.
- Install brake light switch harness connector.
- Reinstall driver's side storage tray.
- Operate brake pedal.
Both brake lights light up.
- Take foot off brake pedal.
Both brake lights must not light up.