Dome Lamp Switch: Service and Repair

Removing





- Turn rotary knob of light switch to "0" position.
- Press rotary knob inward (arrow-i-) and turn slightly to right (arrow -2-).
- Hold rotary knob in this position and by pulling on rotary knob remove light switch out of instrument panel (arrow -3-).
- Disconnect harness connector.

Installing
- Connect harness connector.
- Hold light switch and press rotary knob inward (arrow -1-) and turn slightly to left (arrow -2-).





- Hold rotary knob in this position and slide light switch into instrument panel.
- Turn rotary knob to "0" position, release and engage switch.