Windshield Washer System, Assembly

Windshield washer system assembly







CAUTION!
Before working on the electrical system:
- Determine the correct coding for the anti-theft radio.
- Switch ignition off
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of the anti-theft radio.


1 - Securing clip
2 - Wiring harness for heated washerjets
3 - Hose
4 - Cover cap
- With connector for heated washer nozzles
5 - Jets
6 - Windshield washer system reservoir
- Removing: Remove right front inner fender lining
7 - Windshield washer system pump
- Pull pump upward off rubber grommet
8 - Harness connector
9 - Securing bolts
- 5 Nm (44 in. lb)
10 - Container cap
11 - Transfer piece
12 - Harness connector for heated washer nozzles
13 - Hose clip