Radiator Cooling Fan: Locations

1- Radiator
^ Removing and installing, Refer to Radiator.
^ After replacing, completely replace coolant
^ With ATF cooler on vehicles with automatic transmission:
Refer to Transmission and Drivetrain.
^ Clean ATF cooler
Refer to Transmission and Drivetrain.
2- Securing pin
3- Securing rubber
4- Connecting piece for ATF- line
^ Only for vehicles with automatic transmission
5- Upper coolant hose
^ Secured to radiator with retaining clip
^ Check for secure fitting
^ Connection diagram for coolant hoses, Refer to Radiator Hose.
6- Coolant fan -V7-
^ Electric fan as M-equipment
7- Fan ring
^ is clipped into the intake air elbow and secured with securing bolt item 8
8- Mounting bolt
9- 10 Nm
10- 2-way connector
11- Rubber bearing
12- Coolant Fan Control (FC) thermal switch -F18
^ For electric fan.
^ Switching temperatures,
1st level on: 92 to 97°C,
off:84 to 91°C
2nd level on: 99 to 105°C,
off: 91 to 98°C secured with retaining clip
13- Connector
^ Black, 4 pin for Coolant Fan Control (FC) thermal switch
14- Sealing strip
^ Installed on radiator at top and bottom
15- O-ring
^ Replace if damaged
16- Locking screw, 10 Nm
17- Lower coolant hose
^ secured with retaining clip at radiator and connecting piece
^ Check for secure fitting
^ Connection diagram for coolant hoses
18- Drain plug, 10 Nm