End Output (Function 06)

Ending Output (Scan Tool Function 06)

Indicated on display:


Rapid data transfer HELP
Select function XX


NOTE:
- If this appears in the display, the test sequence is faulty.


Warning!
DTC memory was not checked


- Follow test sequence precisely: first Check Diagnostic Trouble Code (DTC) memory, if necessary eliminate malfunctions, then erase.


- Press buttons -0- and -6- to end output.

Indicated on display:


Rapid data transfer Q
06 End output


- Press -Q- button to confirm input.

Indicated on display:


Rapid data transfer Help
Enter address word XX


- Switch off ignition.
- Disconnect VAG 1551 Scan Tool (ST).