High Intensity Gas Discharge (HID) Headlamps

Headlights With High Intensity Gas Discharge (HID) Lamps Assembly

CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off
- Disconnect the battery Ground (GND) strap.
- After disconnecting battery, briefly turn headlights on and off in order discharge any residual voltage.
- After reconnecting battery, re-code and check operation of anti-theft radio.


1 - Control Module for High Intensity Gas Discharge (HID) Lamp - J343- / - J344-
2 - Small cover cap
3 - Mounting screws
4 - Large cover cap
5 - Mounting screws
6 - Securing ring
7 - HID low beam lamp
- 55w
8 - Mounting screw
9 - HID lamp reflector
10 - Mounting frame
11 - Headlight housing
- Headlights, adjusting
12 - Bulb socket
13 - Parking/turn signal light
Bulb 12V, 21W/5W
14 - High beam bulb -M30- / -M32-
- Bulb H7 12 V, 55 W
15 - Securing plate
16 - Mounting frame
- For HID lamp control module
17 - Mounting screws