Fuel Supply System Components, Removing and Installing

NOTES:
- Hose connections are secured with either spring-type or clamp-type clips.
- Always replace clamp-type clips with spring-type clips.
- Fuel hoses in engine compartment must only be secured with spring-type clips. The use of clamp or screw-type clips is not permitted.
- V.A.G 1921 pliers are recommended when installing spring-type clips.

Observe safety precautions. Technician Safety Information
Observe rules for cleanliness. [1][2]Technician Safety Information
Removing and installing fuel tank with its attachments and fuel filter. Fuel Tank/Attachments/Fuel Filter, Removing and Installing
Servicing accelerator mechanism, engine code AEB. Adjustments
Adjusting throttle cable. Adjustments
Checking electronic accelerator control (E-Gas). Testing and Inspection
Servicing EVAP system components.