Front Final Drive, Servicing

Front Final Drive, Servicing
(Transmission in vehicle)





1. Oil seal
^ Between final drive and transmission housing
2. Shim Behind tapered roller bearing outer race
3. Tapered roller bearing outer race
4. O-ring
^ Always replace
5. Sealing plug
^ 30 Nm (22 ft. lbs.)
6. Bolt
^ 23 Nm (17 ft. lbs.)
7. flanged shaft, right
8. Oil seal for flanged shaft, right
9. Bolt
^ 23 Nm (17 ft. lbs.)
^ Follow correct tightening sequence
10. Cover for final drive
11. Shim
^ Behind tapered roller bearing outer race
12. Tapered roller bearing outer race
13. O-ring
^ Always replace
14. Differential
15. Bolt
^ 23 Nm (17 ft. lbs.)
^ Follow correct tightening sequence
16. Housing cover for front axle
17. Dowel sleeve
18. Seal
19. Spring pin
20. Lever
^ For selector shaft
21. Sealing ring
^ For selector shaft
22. Bolt
^ 23 Nm (17 ft. lbs.)
23. Oil seal for flanged shaft, left
24. Drive gear
^ For speedometer sensor -G22-
25. flanged shaft, left
^ Removing and installing
26. Bearing bracket for flanged shaft
27. Grooved ball bearing for flanged shaft
28. Circlip
29. O-ring
^ Square section
^ Remove and install left flanged shaft in order to replace O-ring