Trunk / Liftgate: Service and Repair

Trunk Lid, Assembly Overview







1 - Trunk lid
2 - Trim
3 - Adjustment buffer
- To remove, trim - 2 - must be removed
- Removing:
- Turn stopper approx. 90° using a ring wrench 24 mm and remove from shaped hole.

4 - Nuts
- Qty 2 per side
- 22 Nm

5 - Hinge
6 - Bolt
- Qty 2 per side
- 22 Nm

7 - Rubber buffer
8 - Gas-filled strut
- Releasing gas.

9 - Lock plate
- Adjusting - within oversized holes
- Gap dimensions: Body panel gaps; Body, rear

10 - Nut
- 7.2 Nm

11 - Wire
12 - Hinge cover
13 - Rubber buffer