Instrument Cluster Bulbs, Replacing (Green Illumination Only)

CAUTION!
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground GND strap.
- After reconnecting battery, recode and check operation of anti-theft radio. Also check operation of clock and power windows.

NOTE: Do not disassemble instrument cluster.





1 - 32 pin multi-connector
- Green
- Connector Connector Views
2 - 20 pin multi-connector
- Red
- Connector, see above view
3 - Bulb with holder (headlight high beam indicator light -Kl-)
- 12 V / 1.12 W
4 - Bulb with holder Malfunction Indicator Lamp (MIL)
- 12V / 1.12W
5 - Bulb with holder (rear hatch/ trunk lid ajar warning lamp -K102-)
- 12 V / 1.12 W
6 - 32 pin multi-connector
- Blue
- Connecto, see above view