Rear

Rear axle, assembly overview

CAUTION:
^ Always replace self-locking nuts.
^ Always replace corroded nuts and bolts.





1. Bolt
^ M8x22
2. Stabilizer bar
3. Clamp
4. Self-locking nut
^ 20 Nm (15 ft. lbs.)
^ Always replace each time after removing
5. Bolt
^ M10 x 50
6. Connecting link
^ Installation position: bend faces outward
7. Self-locking nut
^ 50 Nm (37 ft. lbs.)
^ Always replace each time after removing
8. Threads in wheel housing
^ If the welded nut threads in the wheel housing are damaged, repair the threads with a commercial thread insert.
9. 45 Nm (33 ft. lbs.)
10. Suspension strut
11. Self-locking nut
^ 70 Nm (52 ft. lbs.)
^ Always replace each time after removing
12. Washer
13. Upper control arm
14. Washer
15. Self-locking nut
16. Bolt
^ Always replace each time after removing
^ M 12x 1.5x95
^ Always replace each time after removing
17. Bolt
^ Turn 70 Nm (52 ft. lbs.) + 90° further
^ M12 x 15 x 95
^ Always replace each time after removing
18. 50 Nm (37 ft. lbs.)
19. Self-locking nut
^ 95 Nm (70 ft. lbs.)
^ Always replace each time after removing
20. Eccentric washer
21. Wheel bearing housing
22. Eccentric bolt
23. Lower control arm
24. Eccentric bolt
25. Track rod
^ The bonded rubber mountings are not available as replacement parts
26. Bolt
^ 95 Nm (70 ft. lbs.)
^ M12 x 1.5 x 85
27. Washer
28. Self-locking nut
^ Always replace each time after removing
29. Self-locking nut
^ 95 Nm (70 ft. lbs.)
^ Always replace each time after removing
30. Eccentric washer
31. Bolt
^ Turn 70 Nm (52 ft. lbs.) + 90° further
^ M 12 x 15 x 100
^ Always replace each time after removing
32. Self-locking nut
^ Always replace each time after removing
33. Bolt
^ 95 Nm (70 ft. lbs.)
^ M12x 1.5 x 80
34. Self-locking nut
^ 95 Nm (70 ft. lbs.)
^ Always replace each time after removing
35. Bolt
^ 95 Nm (70 ft. lbs.)
^ M12 x 1.5 x 80
36. Axle beam