Language Versions For Navigation System Display, Adaptation
Language versions for Navigation system display*, adaptation
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select function 10, "Adaptation".
Indicated on display:
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display:
Adaptation
Enter channel number XX
- Press buttons -0- and -4- to select channel 04.
Indicated on display:
Adaptation Q
Enter channel number 04
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 1 ->
<-13->
NOTE:
- Only the last character of the five position language version code is shown on the display, e.g.: 7 for German!
- An incorrect entry ends adaptation function. Restart by selecting function 70 "Adaptation again!
- Use the VAG 1551/1552 to enter the code directly or step-by-step!
*) if equipped
Code table:
Code Language versions
00001 German
00002 English
00003 French
00004 Italian
00005 Spanish
00006 Portuguese
Step-by-step entry :
- Language coding value is decreased in steps by pressing button -1- and increased with button -3-, e.g.: to 2 for English.
Indicated on display:
Channel 4 Adaptation 2 Q
<-13->
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 ->
Changed value is stored
- Press - button to complete adaptation sequence.
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
- End output (function 06).
Direct entry:
- Press -> button.
Indicated on display:
Channel 4 Adaptation 1
Enter adaptation value XXXXX
- Enter applicable 5 position language code using VAG 1551/1552 button pad.
Example:
Coding: 2 (English); Input value: 00002
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 1 Q
Enter adaptation value 00002
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 ->
Changed value is stored
- Press -> button to complete adaptation sequence.
Indicated on display (select function):
Rapid data transfer HELP
Select function XX
- End output (function 06).