Up To 07/2000

Batteries For Key (Foldable) With Radio-frequency Remote Control, Removing And Installing --> 07.00







1. Radio-frequency unit - upper part (turned-over)
2. Key with variable code transponder
3. Radio-frequency unit - lower part
4. Batteries

Removing
- Insert screwdriver in slot between radio-frequency unit - 1 - and key - 2 -.







- Rotate screwdriver in direction of - arrow - and remove transmitter unit from key.







- Press apart radio-frequency unit in direction of - arrow -.







- Use a screwdriver to pry batteries out of holders in direction of - arrow -.

Installing
- Note polarity and installation position of batteries when installing.

- Place batteries in transmitter with positive terminal downward (positive terminal is marked in housing).
- Press on battery with light pressure to engage it in radio-frequency unit.
- Reattach cover to radio-frequency unit (do not damage seal).







- Engage radio-frequency unit on key.