Intake Air Control Valve: Testing and Inspection

Recirculating valve for turbocharger -N249-, checking
The valve in the hose between the intake manifold and the recirculating valve is open if it is without current. The hose to the vacuum reservoir is closed.

Checking conditions
^ Output Diagnostic Test Mode (DTM) must be performed.
Refer to Powertrain Mangement.

Checking sequence
- Switch off ignition.
- Disconnect connector from Recirculating valve for turbocharger -N249-.





- Measure resistance between valve contacts.
^ Specification: 25 to 35 Ohms
If the specification is not obtained:
- Replace Recirculating valve for turbocharger -N249-.