Control Module Identification And Equipment

Control module identification
The control module version is indicated when the V.A.G 1551 Scan Tool (ST), VAG 1552 Scan Tool (ST) or the new VAS 5051 tester is connected and the control module for engine electronics is selected.

Equipment

Engine Code ATW

System identification Motronic ME7.5

Emissions limits according to LEV

E-gas system Yes

On Board Diagnostic (OBD) OBD II

Output Diagnostic Test Mode (DTM) Yes

Type of data transfer to V.A.G1551/1552 Rapid data transfer

Control module coding V.A.G1551/1552
VAS5O5I tester

DTC memory Permanent memory 1)

Memory for adaptation values Temporary memory 2)

Oxygen sensor control 2 sensors

Knock sensor control 2 knock sensors

Intake manifold change-over No

Camshaft adjustment No

Boost pressure regulation Yes

Secondary Air Injection (AIR) system Yes

1) Independent of voltage supply.

2) Values are lost when voltage supply is interrupted.