Old Undamaged Window, Preparing For Glazing

Old Undamaged Window, Preparing For Glazing







NOTE:
- When re-using an undamaged window, cut back residual adhesive sealing compound to 1 ... 2 mm just before re- bonding. Do not damage primer and ceramic coating when doing this.
- Residual material serves as adhesion base for newly applied adhesive sealing compound.


Warning!
Do not prime adhesive surface and do not treat with a cleaning solution. Keep adhesive surface free of dirt and grease.


Exception: If bonding is not performed immediately after cutting back, the remaining residual material must be activated with activator D 181 801 A1.