Glove Compartment: Service and Repair

Passenger-side Storage Compartment, Removing

Removing
- Switch ignition off.







- Remove bolts - arrows -.







- Open storage compartment on passengers side - 1 -.
- Carefully unclip light at top from locking mechanism using screwdriver.

NOTE: Be careful not to damage glove compartment lamp switch when removing lamp.

- Carefully remove diffusion lens with lamp holder.
- Replace 12V/3W lamp if necessary.

NOTE:
- Note installation position of glove compartment lamp when installing. Storage compartment switch must point downward.
- For the sake of illustration, glove compartment is depicted as removed.







- Install diffusion lens with mounting plate into storage compartment and engage.

After repair work of glove compartment lamp, a function test of switch must be performed. Lamp must not light up with cover closed.







- Remove bolts - arrows -.
- Disconnect harness connector - 2 - from lamp - 1 -.







- Pull storage compartment on passengers side - 1 - out of instrument panel - arrow -.