Rear Window Wiper, Removing
CAUTION!
- Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.
NOTE: Before removing wiper arm, ensure that wiper motor is in park position. This ensures proper wiper arm/blade park position when reinstalling.
Wiper Arm, Removing
- Pry off wiper arm cap -arrow- with a screwdriver.
- Loosen M8 nut -arrow-, but do not remove completely,
- Move wiper arm lightly until it releases.
- Remove nut completely and remove wiper arm.
Rear Wiper Motor, Removing
- Remove inner trim from rear hatch
- Disconnect electrical connector -1- from wiper motor.
- Pull off hose -2- to washer jets.
- Remove M10 hex bolts -arrows- and remove wiper motor.
- When installing the wiper motor, ensure rear window seal seating as illustrated.