Reading

Read Measuring Value Block (Function 08)

The measuring value block is divided into 6 display groups, each containing 4 display fields.
Use this function to observe various radio system inputs.
- Connect VAG 1551 Scan Tool (ST), input address word 56 "Radio" and then press -> button, until "Select function XX" is shown in display.

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to select function 08, "Read measuring value block".

Indicated on display:


Rapid data transfer Q
08 - Read measuring value block


- Press -Q- button to confirm

Indicated on display:


Read measuring value block Q
Enter display group number XX


- Enter desired display group number (from table) and press -Q- button to confirm input.

Indicated on display:


Read measuring value block X ->
1 2 3 4


NOTE:
- Interpreting measured values in display fields. Evaluating Measured Value Blocks
- With printer switched on, information in display is printed out.
- Press -> button if measured value specifications are met in all display fields.