Batteries For Main Key (Folding) With Radio-Frequency Remote Control, Removing and Installing

Batteries for main key (folding) with radio-frequency remote control, removing and installing

Assembly overview







1 - Radio-frequency unit - upper part
2 - Main key with variable code transponder
3 - Radio-frequency unit - lower part
4 - Transponder battery

Removing
- Insert screwdriver in slot between radio-frequency unit - 1 - and main key - 2 -







- Turn screwdriver in direction of - arrow - and unclip radio-frequency unit from main key.







- Press radio-frequency apart unit in direction of - arrow -.







- Use a screwdriver to pry batteries out of holders in direction of - arrow -.

Installing

NOTE: Note polarity and installation position of batteries when installing.

- Place batteries in radio-frequency unit with positive terminal downward (positive terminal is marked in housing).
- Press on battery with light pressure to engage it in radio-frequency unit.
- Reattach cover to radio-frequency unit (do not damage seal).







- Then engage radio-frequency unit on main key.