Computers and Control Systems: Locations

Component Locations Overview

Component Location Overview:

1 Evaporative Emission (EVAP) Canister Purge Regulator Valve-N80-*/**
- EVAP system
2 Mass Air Flow (MAF) sensor -G70-*
3 Positive Crankcase Ventilation (PCV) Heating Element -N79-
4 Throttle valve control module -J338-*
5 Motronic Engine Control Module (ECM) -J220-*
6 4-pin connector
- Brown
- For Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) -G130- and Oxygen Sensor (O2S) Heater 1 -Z29-
7 4-pin connector
- Black for Heated Oxygen Sensor (HO2S) before catalytic converter -G39- and Oxygen Sensor (O2S) Heater -Z19-
8 Intake Air Temperature (IAT) Sensor -G42-
9 Ignition Coil -N152-
- With Ignition Coil Power Output Stage -N157-, item 3
10 Secondary Air Injection (AIR) Solenoid Valve -N112-*/**
- Secondary air system
11 Secondary Air Injection (AIR) Pump Relay -J299-*/**
- Secondary air system
12 Engine Coolant Temperature (ECT) Sensor -G62-*
13 Central connector
14 3-pin connector
- Brown for Knock Sensor (KS) 1 -G61-
15 3-pin connector
- Gray for engine Engine Speed (RPM) Sensor -G28-
16 Engine Speed (RPM) Sensor -G28-*
17 Secondary Air Injection (AIR) Pump Motor -V101-*
- Secondary air system
18 Distributor with Camshaft Position (CMP) sensor -G40-*
19 Injectors (-N30- through -N33-)*/**
20 Knock Sensor (KS) 1 -G61-*, item 8
21 Ground connection
22 Fuel pressure regulator
23 Temperature regulator
- For intake air preheating
24 Leak Diagnostic Pump (LDP)
25 EVAP Canister
- EVAP system