Front Seat Belt With Belt Tensioner, Assembly Overview

Front Seat Belt With Belt Tensioner, Assembly Overview


WARNING!
Before beginning disassembly, straightening or other body repair work, the belt tensioning units must be removed.







1 - Belt height adjuster
- To remove height adjustment mechanism, trim on top of B-pillar must be removed first
2 - Socket head screw
- 23 Nm (17 ft lb)
3 - Belt relay
4 - Cover cap of belt guide
5 - Bolt
- 40 Nm (30 ft lb)
6 - Front belt lock
7 - Connector
- For electric belt tensioner only
8 - Seat belt with belt tensioner
- Two different belt tensioners are installed:
- Electric belt tensioner for vehicles with side airbag.
- Mechanical belt tensioner for vehicles without side airbag.
- To remove, first remove lower B-pillar trim and sill panel trim.
- Retaining lugs determine position of belt reel
- Loosening bolt -9- deactivates belt tensioner for removal, installation, handling and shipping.
Tightening returns belt tensioner to functional condition (not valid for electric belt tensioner)
9 - Bolt
- 40 Nm (30 ft lb)
10 - Bolt
- Only on 4-door vehicles
- 40 Nm (30 ft lb)
11 - Belt mount, lower
- Only on 4-door vehicles
12 - Hex-head bolt
- Only on 2-door vehicles
- 40 Nm (30 ft lb)
13 - Washer
- Only on 2-door vehicles
14 - Guide bracket
- Only on 2-door vehicles
15 - Bolt
- 23 Nm (17 ft lb)
- Only on 2-door vehicles
16 - Phillips head screw
- 155 Ncm (14 in lb)
17 - Belt guide
- Secured with 2 Phillips head screws
- 155 Ncm (14 in lb)