Connector Locations

Radio Multi-pin Connector Assignments, "Premium IV & V" (incl. "Monsoon")







Connector I consists of three separate connector parts:

20 pin multi-connector I -T20-, part 1, yellow

1 - Line out, left rear
2 - Line out, right rear
3 - Line out, Ground (GND)
4 - Line out, left front
5 - Line out, right front
6 - Switched positive (B+) for amplifier

20 pin multi-connector I -T20-, part 2, green*

7 - Open
8 - Clock
9 - DATA
10 - ENA
11 - Remote control (serial input)
12 - Open

*) Where applicable

20 pin multi-connector I -T20-, part 3, blue

13 - CD changer - DATA IN
14 - CD changer - DATA OUT
15 - CD changer - CLOCK
16 - CD changer - Power supply, positive (B+) supply
17 - CD changer - Control signal
18 - CD changer - Ground (GND), terminal
19 - CD changer - LINE OUT, left
20 - CD changer - LINE OUT, right

"Premium V" 8 pin multi-connector II -T8a- brown

1 - Speaker - right rear
2 - Speaker - right rear
3 - Speaker - right front
4 - Speaker - right front
5 - Speaker - left front
6 - Speaker - left front
7 - Speaker - left rear
8 - Speaker - left rear

"Premium V - Monsoon" 8 pin multi-connector II -T8a-, brown







1 - Amplifier + right rear speaker signal
2 - Amplifier - right rear speaker signal
3 - Amplifier + right front speaker signal
4 - Amplifier - right front speaker signal
5 - Amplifier + left front speaker signal
6 - Amplifier - left front speaker signal
7 - Amplifier + left rear speaker signal
8 - Amplifier - left rear speaker signal

8 pin multi-connector 111 -T8-, black

1 - Signal for anti-theft alarm system
2 - Open
3 - Data Link Connector (DLC) K-wire
4 - Ignition switch - S contact
5 - Battery, positive (B+) supply, terminal 30 (control input for "SAFE" display/anti-theft)
6 - Illumination, terminal 58b
7 - Battery, positive (B+) supply, terminal 30
8 - Battery, negative (-) ground supply, terminal 31