Engine Control Module, Adapting to Electronic Immobilizer

Special tools and equipment
- VAG1551 scan tool or VAG1552 mobile scan tool with VAG1551/3B cable

Conditions
- Authorized vehicle key required.

Work sequence
- Connect VAG1551 scan tool or VAG1552 mobile scan tool with VAG1551/3B cable.
- Switch ignition on.
- Operate scan tool or vehicle system tester taking into account information on display:
- Press key 1 for "Rapid data transfer".
- Press keys 1 and 7 for address word "instrument cluster" and confirm entry with Q key.

Indicated on display


1J0919991A A4-COMBIINSTR. VDO X00
Coding 20142 WSC XXXXX


- Press -> key.

Indicated on display


IMMO IDENTNO .: VWZ7Z0555153 ->


- Press -> key.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press keys 1 and 0 for function "Adaption" and confirm entry with Q key.

Indicated on display


Adaption
Feed in channel number XX


- Press key 0 twice for "Channel number 0" and confirm entry with Q key.

Indicated on display


Adaption Q
Erase learned values?


- Confirm input with Q key.

Indicated on display


Adaption ->
Learned values have been erased


- Conclude adaption by pressing -> key.
- Press keys 0 and 6 for function "End output" and confirm entry with Q key.
- Switch ignition off.


NOTE: The identity of the engine control module is read into the immobilizer control module when next switching the ignition on.