8-Way Seat Backrest Adjustment Drive, Removing and Installing

8-way Seat Backrest Adjustment Drive, Removing And Installing

Removing
- Remove seat.
- Remove 8-way seat trim.
- Remove cover in lower area of backrest and roll up.
- Using a screwdriver, disconnect harness connector - 1 - in direction of arrow.
- Pry out locking washer - 2 - from shaft - 3 - using a screwdriver.
- Drive shaft - 3 - approx. 15 cm into backrest frame using hammer and drift.
- Unscrew nut - 4 -.







- Remove drive - 5 -.







Installing
- Installation is reverse of removal.