Initiating Basic Setting

Basic setting, initiating

Special tools and equipment
^ V.A.G 1869 Brake filling and bleeder unit

Function 04 "Initiate basic settings" performs several functions:

^ Display group 001 is required to bleed the hydraulic system.

Note: The basic setting to bleed the hydraulic unit is only required when one chamber of the brake fluid reservoir is completely empty.

Display group number 01: Bleeding hydraulic unit.

Note: All functions, which could previously be performed V.A.G 1551 can also be performed with the tester VAS 5051.

^ Connect brake filling and bleeder unit V.A.G 1 869.
^ Connect V.A.G 1551 Scan Tool and select (address word 03) "Brake electronics" with ignition switched on.





Indicated on display
^ Press keys 0 and 4. (The function "Initiating basic setting" is selected with 04).





Indicated on display
^ Confirm entry with key Q.





Indicated on display:
^ Press keys 0, 0 and 1
^ Confirm entry with key Q.





Indicated on display:
^ Operate pedal with substantial foot pressure and hold.
- Pedal moves down
- Hydraulic pump runs
- Pedal comes back





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS5051.





Indicated on display
^ Operate pedal with substantial foot pressure and hold.
- Pedal moves down
- Hydraulic pump runs
- Pedal comes back





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Operate pedal with substantial foot pressure and hold.
- Pedal moves down
- Hydraulic pump runs
- Pedal comes back





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS5051.





Indicated on display
^ Operate pedal with substantial foot pressure and hold.
- Pedal moves down
- Hydraulic pump runs
- Pedal comes back





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Operate pedal with substantial foot pressure and hold.
- Pedal moves down
- Hydraulic pump runs
- Pedal comes back





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Operate pedal with substantial foot pressure and hold.
- Pedal moves down
- Hydraulic pump runs
- Pedal comes back





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Operate pedal with substantial foot pressure and hold.
- Pedal moves down
- Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Operate pedal with substantial foot pressure and hold.
- Pedal moves down
- Hydraulic pump runs
- Pedal comes back





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Hydraulic pump runs





Indicated on display
^ Press key 3 on VAG 1551 or arrow up key on VAS 5051.





Indicated on display
^ Press (arrow) key.





Indicated on display
^ Press keys -0- and -6- to end output.





Indicated on display
^ Confirm entry with Q key.





Indicated on display
^ Press C key.
^ Switch ignition off.
^ Disconnect connections to V.A.G 1551 Scan Tool.
^ Bleed brake system.