Preparing New Window For Glazing

Preparing New Window For Glazing







New windows are shipped pre-coated with -PUR-. Pre-coating consists of positions - 1 -, - 2 - and - 3 -.

1. Sealing lip
2. Spacer
3. Application are for adhesive bead
4. Washer

Side window

NOTE: Due to production change of pre-coating material for side windows, handle pre-coating as follows:

- Saturate cloth with silicone remover.







- Always wipe application area for adhesive bead - 3 - twice using saturated cloth.
- Normally, after an air drying time of at least five minutes, Activator D 181 801 A1 must be used for pre-coated windows.

Gap dimensions for side windows
When inserting side window, a gap dimension of 56 mm must be maintained between upper edge of window and window flange at side panel.

Reason: Distance is necessary for securing roof base carrier.

Rest of bonding procedure remains unchanged.