Rear Lid Upper Trim, Removing and Installing

Rear Lid Upper Trim (Golf), Removing And Installing

Assembly overview







1 - Upper trim panel
2 - Rear lid
3 - Four guide pins
4 - Two securing clips
5 - Two retainers for rear shelf
- Left and right
6 - Two spreader pins for retainer -5-
- Left and right
7 - Four clips

Removing
- Remove lower trim.
- Pull spreader pin -6- out from retainer -5- on left and right-hand sides.
- Unclip trim -1- first along sides -arrow A- and then at top -arrow B-.

Installing
Install in reverse order of removal


NOTE: Before installing check clips -4- and clips -7- and replace as necessary.