Engine Control Module, Adapting to Electronic Immobilizer

Engine Control Module, Adapting to Electronic Immobilizer

Special tools and equipment
- V.A.G 1551 scan tool or 1552 scan tool with cable VAG 1551/3

Conditions
- Authorized vehicle key required.

Work sequence
- Connect VAG 1551 scan tool or or 1552 scan tool with cable VAG 1551/3.
- Switch on ignition.
- Operate scan tool or vehicle system tester taking into account the information on the display:
- Press key 1 for "Rapid data transfer".
- Press keys 1 and 7 for address word "instrument cluster" and confirm entry with Q key.

Indicated on display:

1J0919991A A4-COMBIINSTR. VDO X00
Coding 20142 WSC XXXXX

- Press the -> key.

Indicated on display:

IMMO IDENTO.: VWZ7Z0555153 ->

- Press the -> key.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press keys 1 and 0 for function "Adaption" and confirm entry with Q key.

Indicated on display:

Adaption
Feed in channel number XX

- Press key 0 twice for "Channel number 0" and confirm entry with Q key.

Indicated on display:

Adaption Q
Erase learned values?

- Confirm input with Q key.

Indicated on display:

Adaption ->
Learned values have been erased

- Conclude adaption by pressing -> key.
- Press keys 0 and 6 for the function "End output" and confirm entry with the Q key.
- Switch off ignition.

NOTE: The identity of the engine control module is read into the immobilizer control module when next switching the ignition on.