Vehicle Alignment Specifications

Vehicle Data Sticker

Example:

For additional information

Vehicle alignment specifications








Specifications for front axle with front wheel drive

5) Camber corrections are not possible. Corrections are possible by moving the sub-frame slightly. Adjust approx 10' to 15'





Specifications for rear axle, vehicles with front wheel drive

Overview of work procedure for measuring vehicle

The following work sequence of steps must be adhered to!

- Check front axle camber and adjust if necessary.

Adjusting camber, Refer to Alignment, Service and Repair, Camber.

- Check rear axle camber.

Camber is not adjustable, Notes, Refer to Alignment, Service and Repair,Camber on rear axle, adjusting

- Check rear axle toe and adjust if necessary Refer to Alignment, Service and Repair,Toe on Rear axle, vehicles with front Wheel drive, adjusting

Vehicles with front wheel drive

The rear axle toe is not adjustable.

Notes, Alignment, Service and Repair

- Check front axle toe and adjust if necessary.

Adjusting toe, Refer to Alignment, Service and Repair, toe

5. Check which suspension component is installed in the vehicle.

This information is found on the vehicle data sticker,Refer to Alignment Testing and Inspection, Vehicle data Sticker