Check DTC Memory (Function 02)
Diagnostic Trouble Code (DTC) Memory, Checking
- Connect V.A.G 1551 Scan Tool and enter address word "02 transmission electronics" and advance until "Select function XX" appears in display Connecting VAG 1551 Scan Tool
Indicated on display
Rapid data transfer HELP
Select function XX
- Press keys 0 and 2 to select function "Check DTC memory" is selected with 02.
Indicated on display
Rapid data transfer Q
02 - DTC memory
- Confirm entry with key Q.
The number of stored DTCs or "No DTC recognized" appears in the display.
X DTCs recognized!
Output on printer V.A.G 1551
No DTC recognized! If "No DTC recognized"
appears after completing repair work,
the On Board Diagnostic is complete.
The stored DTCs are displayed in turn and printed out.
- Press -> key.
- After last DTC has been displayed and printed out, correct as described in DTC table 5 Speed Automatic 09A
- Press -> key.
Indicated on display
Rapid data transfer HELP
Select function XX
After checking the DTC memory and correcting the DTCs:
- Erase DTC memory. With Manufacturer Scan Tool