Drive For Sunroof, Adjusting ("0" Position) (Rockwell)

Drive For Sunroof, Adjusting ("0" Position)

It is necessary to adjust the "0" position if the drive was removed when not in "0" position or if the sunroof was locked by emergency actuation or opened in that mode.

Requirements

- Drive removed but still connected electrically.

- Select "tilt roof" by turning preselector rotary switch.
- Select "closed roof" by turning preselector rotary switch.
- Select "opened roof" with preselector rotary switch.
- Select "closed roof" with preselector rotary switch.
- "0" position can be recognized by viewing the window on the motor. The markings must align (arrow).
- Install drive in this position ("0" position) with sunroof closed.