Suspension Spring ( Coil / Leaf ): Service and Repair

- Compress coil spring with -VAG 1752/1- until upper spring plate is free.
- Remove nut from piston rod.
- Remove individual parts of suspension strut and coil spring with -VAG 1752/1-.
1 - Commercially available ratchet handle
2 - T 10001/8
3 - T 10001/11
4 - T 10001/5
5 - VAG 1752/1 Spring compressor
6 - VAG 1752/4 Retainer
Special tool -3186- is an alternative for tools described above.





- Ensure coil spring is seated correctly in adapter -VAG 1752/4 (arrow),

Installing





- Install coil spring with compressor -VAG 1752/1- on spring perch.

Note:
End of coil spring must lie against stop (arrow).

Tightening torque:
Nut for upper shock absorber mount 60 Nm (44 ft lb)
Always replace nut!

Nut for upper spring plate 60 Nm (44 ft lb)
Always replace nut!

Continue installation in reverse sequence.